|
Eurotubes will gladly produse wire guide tubes to a customers’ own
special requirements. Small quatities and samples are also catered
for.
Eurotubes produce tubes for all types of
processes, not only for the end user customers (include Siemens,
Philips, Sony, Matshushita, General Motors, Ford and Samsung), but
also for winding machine manufactorer suich as ATS (formerly
Siemens), Aumann, B+R, Tanac, Nittoku, Sipro, Bobifil, Meteor and
others.
Non standard tubes can be supplied with bore
size from 0,20 mm and the outside diameter from 0,60 mm to 12,0 mm.
For any enquiries on special tubes, please fill out the diagrams in
this brochure, detailing dimensiond required. If you fax this to us,
we will be able to provide a quotation immediately.
The selection of material which to produce the tube is of paramount
importance. Specially created steel EN31 has been selected as the
ideal material due to its resistance to wear
and stability. The use of induction heating equipment also allows
selected areas of the tube to hardened and tempered to various
hardness ranges. Induction hardening gives the manufacturer the
freedom to produce softer tubes with very hard tips - which prolong
the lifetime wear of the tube. The standard tube hardness is about 66
HRC - comparable to tungsten hardness but without the brittleness.
The manufacturing process used allow maximum flexibility and speed
in tube production.
TUBE FEATURES
1. Extreme tip
hardness - up to 69 HRC
2. A mirror finish
on the tube tips and a smoth bore.
3. Consitency of
dimensions, hardness and straigthness.
Each tube is 100% inspected using
radii profil equipment and microscopes to ensure the quality of
every wire guide tube.
As shown on next pages features are also catered for and we always
happy to discuss any queries you may have. |
Standard range
